Skip to main content
MAK Water

DMRO-1000

Demineralised Water Treatment Plant (DMRO)

OtherReverse osmosis desalination unitModelled
DM
Fresh water production
1000m3/d
Rated power
67kW
Max feed water salinity (TDS)
1000ppm

Characteristics

3 of 4 fields · all sourced · retrieved 2026-11-01
Fresh water production
1000m3/d
Rated power
67kW
Max feed water salinity (TDS)
1000ppm

MAK Water's Demineralised Water Reverse Osmosis (DMRO) plants treat fresh water with less than 1,000 mg/L of dissolved solids and less than 30 mg/L of suspended solids to produce high purity demineralised water with TDS below 1 mg/L. The standard process combines pre-filtration (auto-backwashing multimedia filters and cartridge filters), anti-scalant dosing to prevent membrane scaling, two-pass RO desalination and a CIP system for membrane cleaning. Adding optional mixed bed ion exchange or continuous electro-deionization (CEDI) brings TDS below 0.1 mg/L, and further pre-RO or post-RO treatment steps can be added to suit feed water conditions or treated water quality requirements. The plants are available as skid mounted or containerised systems.

Manufacturer datasheet (14)

Permeate recovery rate
<80%
Permeate TDS
<1 (<0.1 with ion exchange or CEDI) @ 25°Cmg/L
Raw water TSS
<30mg/L
Raw water temperature
<45°C
Ambient design temperature
5 ~ 45 (-15 ~ 50 for insulated containerized system)°C
Feed water inlet pressure
>15 (flooded suction)kPa
Permeate discharge pressure
~40 (higher discharge pressures available on request)kPa
Brine discharge pressure
~40 (higher discharge pressures available on request)kPa
Power supply
AC 380~450 V, 3 Phase, 50/60 Hz
No. containers (optional)
2 x 40’
Configuration
skid mounted or containerised systems
Multimedia pre-filtration
✓
Container side access door
✓
Premium instrumentation package
✓

More from MAK Water