Skip to main content
Equipment catalogHypercharger HYC50
Alpitronic

Hypercharger HYC50

Hypercharger HYC50 – Compact wall-mountable 50 kW charger

OtherEV DC fast chargerModelled
HY
Rated power
50kW
Peak efficiency
97%
Maximum output voltage
1000V
Maximum output current
150A

Characteristics

5 of 5 fields · all sourced · retrieved 2026-11-01
Rated power
50kW
Peak efficiency
97%
Maximum output voltage
1000V
Maximum output current
150A
Charging outlets
2outlets

The Alpitronic Hypercharger HYC50 is a compact 50 kW DC charger that can be wall-mounted or placed on a compact pedestal, for indoor and outdoor installation. It charges one vehicle at 50 kW with a continuous charging current of 150 A, or two vehicles simultaneously at 25 kW each. SiC semiconductors give an efficiency of up to 97%, and a low noise level suits residential installations. A cable management system makes the charger easier to use and extends cable lifespan, and the front door can be personalised with a custom printed graphic.

Manufacturer datasheet (33)

Dimensions (height x width x depth)
1,300 x 520 x 250 mmmm
Weight
95 - 145 kg (Depending on the configuration)kg
Operating temperature
-30° up to +55° C°C
Storage temperature
-40° up to +55° C°C
Altitude
≤ 4,000 m a.s.l. (for configuration with CHAdeMO cables, the max. installation height is limited to 2,000 m a.s.l.)m
Humidity
10% - 95% relative (non-condensing)%
Ingress protection
IP54
Impact protection
IK10 (Not including Payment terminal)
Installation
Indoor and outdoor installation
Type of installation
Wall mount or pedestal (optional foundation base in concrete)
Charging interfaces
CCS2, CHAdeMO
Granularity of output power
25 kW | 24.95 kW (limited power version)kW
Cable lengths
4.45 m, 7.5 m and 10 mm
AC nominal input voltage (RMS)
400 V -15% | +10%V
AC maximum input current (RMS)
90 AA
Frequency
50 Hz | 60 HzHz
Network type
3phase TN-C | TN-S | TN-C-S | TT
Power factor
> 0.99 at full load
Controllable PF range
±0.95
THDi
< 5% at full load%
Overvoltage category
OVC III, DIN EN 60664-1
Integrated coordinated lightning protection (SPD)
Type 1 + 2 + 3
Standby power consumption
25 W (without payment terminal)W
Noise level parameterization
<50 dBA (silent mode)dBA
User interface
10.1” touch screen
Remote management
Diagnostics, software updates
Branding
Printed design front panel
Payment system
Optional, choose between different credit card readers
Law on weights and measurements
DC meter in accordance with the German Calibration Law (Eichrecht), MID Meter in accordance with MID Directive and LNE
Additional safety features
Door contact switch
DC standard protocol (communications with the vehicle)
CCS: IEC 61851-23, ISO 15118-2, DIN 70121
EMC
IEC61851-21-2:2018 (Class A, B)
RFID system
ISO14443A/B, ISO18092

More from Alpitronic

HY
AlpitronicHypercharger HYC200
EV DC fast charger
100–200 kW